LG NA2000-EAQF Manuale Utente

1OWNER’S MANUALDIGITAL SIGNAGE MEDIA PLAYER(Hardware)DIGITAL SIGNAGE MEDIA PLAYERNC1000 NC1100 NA1000 NA1100NC2000 NC2100 NA2000 NA2100www.lgsup

10In/Out Cable ConnectionNC10002 Connect the D-sub port of NC1000 and RGB-IN port of the monitor with a D-sub cable.3 Connect NC1000 (OUT) to the moni

11In/Out Cable Connection5 Connect a LAN cable to the NC1000.NC10004 Connect the NC1000 to the monitor with a LINE-OUT cable.NC1000

12In/Out Cable Connection2 Connect NC1000 to a monitor with an HDMI cable.1Connect the appropriate power cables to a monitor and NC1000 respectively.N

13In/Out Cable Connection4 Connect a LAN cable to NC1000.3 Connect NC1000 (OUT) to the monitor (IN) with an RS-232C cable.NC1000NC1000

141 Click the button in the lower left of the screen.2 Select Start > Control Panel > Sounds and Audio Devices > Audio.3 Sel

153Connect the NC1000's RS-232C OUT to the RS-232C IN of the  rst monitor, which has SET ID = 1.4Connect other monitors with RS-232C cables as s

16Speci cationsNC2000Dimensions 99.8 mm (W) x 183.3 mm (H) x 28.4 mm (D) (only Set)Weight 0.215 kg (only Set)CPU Intel ATOM Processor 330 1.6 GHz(Du

17NC2000Basic ComponentsThe NC2000 consists of the following components. Please check that these components have been included prior to installation.A

18Back PanelConnectionsNumber Connection DescriptionHDMI Out For an HDMI-compatible monitor.LAN Connector For a LAN cable.USB InFor USB-type devices,

19Installation1 Remove the screw and Metal cover.2 Attach the Box Guide to the rail slots, and press it upward.3 Use screws to secure the player and t

2CONTENTSNC1000Specications ...4General Specificatio

20Dimensions 250 mm (W) x 220 mm (H) x 45 mm (D) (only Set)Weight SSD 1.590 kg (only Set)HDD 1860 g (only Set)CPU NC1100 Intel® Celeron® Processor P45

21Basic ComponentsOptional ItemsM3, L12 x 4 (for attachment of Box Guide on the monitor)NC1100/NA1000/NA1100Included in the BoxThe NC1100/NA1000/NA110

22NC1100/NA1000/NA1100Back PanelNumber Connection DescriptionPower Cable In For the power cable.RS-232C Out For the RS-232C cable.Power Button Turns t

231 Place the handle into the slots on the side of the product.2 Use screws to secure the handle.3 Place the rail in the slots on the side of the prod

244 As shown below, use screws to secure the Box Guide in the four slots at the back of the monitor.5 Attach the Box Guide to the rail slots, and pres

251Connect the appropriate power cables to a monitor and NC1100/NA1000/NA1100 respectively. NC1100/NA1000/NA1100Connecting a Monitor with D-sub CableI

26In/Out Cable ConnectionNC1100/NA1000/NA11002Connect the D-sub port of NC1100/NA1000/NA1100 and RGB-IN port of the monitor with a D-sub cable.3 Conne

27In/Out Cable Connection5 Connect a LAN cable to the NC1100/NA1000/NA1100.NC1100/NA1000/NA11004 Connect the NC1100/NA1000/NA1100 to the monitor with

28In/Out Cable Connection2 Connect NC1100/NA1000/NA1100 to a monitor with an HDMI cable.1Connect the appropriate power cables to a monitor and NC1100/

29In/Out Cable Connection4 Connect a LAN cable to NC1100/NA1000/NA1100.3 Connect NC1100/NA1000/NA1100 (OUT) to the monitor (IN) with an RS-232C cable.

3NC1100/NA1000/NA1100Specications ...20General Specifi

301 Click the button in the lower left of the screen.2 Select Start > Control Panel > Sounds and Audio Devices > Audio.3 Sel

31Connecting a Monitor with DP CableAttentionTo enable DP connection, the monitor that will be connected to NC1100/NA1000/NA1100 must support the DP i

323 Connect NC1100/NA1000/NA1100 (OUT) to the monitor (IN) with an RS-232C cable.4 Connect the NC1100/NA1000/NA1100 to the monitor with a LINE-OUT cab

335 Connect a LAN cable to NC1100/NA1000/NA1100.MIC INPWMIC INPWMIC INPWMIC INPWMIC INPWMIC INPWMIC INPWMIC INPWMIC INPWMIC INPWNC1100/NA1000/NA1100At

343Connect the NC1100/NA1000/NA1100's RS-232C OUT to the RS-232C IN of the  rst monitor, which has SET ID = 1.4 Connect other monitors with RS-2

35Dimensions 99 mm (W) x 179 mm (H) x 28.5 mm (D) (only Set)Weight 0.288 kg (only Set)CPU(NC2100)CPU(NA2000)CPU(NA2100)Intel® Celeron® Processor P4500

36Basic ComponentsThe NC2100/NA2000/NA2100 consists of the following components. Please check that these components have been included prior to instal

37NC2100/NA2000/NA2100Back PanelNumber Connection DescriptionUSB InFor USB-type devices, including memory, hard disk, CD-ROM, key-board, and mouse.HDM

38Installation1 Remove the screw and Metal cover.2 Attach the Box Guide to the rail slots, and press it upward.3 Use screws to secure the player and t

39Limitations of Microsoft Windows Embedded StandardFrequently Asked Questions (FAQs)The following are potential errors that may occur due to internal

4Dimensions250 mm (W) x 220 mm (H) x 45 mm (D) (only Set)Weight1.43 kg (only Set)CPUIntel ATOM Processor 330 1.6 GHz(Dual Core), FSB 533 MHzChip SetNv

40Make sure to read the Important Precautions before using the product.Keep the User’s Guide(CD) in an accessible place for furture reference.The

5Basic ComponentsOptional ItemsM3, L12 x 4 (for attachment of Box Guide on the monitor)NC1000Included in the BoxThe NC1000 with the following componen

6NC1000Back PanelA BCNumber Connection DescriptionPower Cable In For the power cable.Power Switch Provides power to the NC1000.RS-232C Out For the RS-

71 Place the handle into the slots on the side of the product.2 Use screws to secure the handle.3 Place the rail in the slots on the side of the produ

84 As shown below, use screws to secure the Box Guide in the four slots at the back of the monitor.5 Attach the Box Guide to the rail slots, and press

91Connect the appropriate power cables to a monitor and NC1000 respectively. NC1000Connecting a Monitor with D-sub CableIn/Out Cable ConnectionIn ord