LG LNP2810T Manuale Utente

1404 (V2.3)MODELLW9422 seriesLNP2810 seriesLNP2810T seriesLNP3020T seriesPlease read this manual carefully before operating your set and retain it for

10 Operation and settings System settingsVersionDisplays the current Model Name and Software version.Date & Time Time zoneSet the time difference

Operation and settings 11Maintenance System reboot Click the [Reboot] button to restart the IP device. It takes some minutes for the IP device to star

12 Operation and settings StorageGeneral > Overwrite: If the micro SD card has insufficient space and this option will be activated. It will over

Operation and settings 13 > Remove the micro SD card 1. Click the [Unmount] button. If the micro SD card is unmounted from the system correctly,

14 Operation and settings Text Overlay Text Overlay > Enable: Set to ON or OFF. Setup menu is appeared when selects ON. > Date & Time : Sel

Operation and settings 15Language Language listSelect a language for the LG Smart Web Viewer configuration menu and information display.• Save: Clic

16 Operation and settings Notes:• It is recommended to select Sensor Framerate value to 30 in 60 Hz region, 25 in 50 Hz region to reduce flicker.•

Operation and settings 17• Save: Click this button to confirm the settings.• Default: Click this button to restore the IP device back to original fa

18 Operation and settings Exposure > IRIS: Select the desired lens iris value for camera exposure. Select [IRIS] option on the [Exposure] menu, th

Operation and settings 19setting is not available.• Default: Click this button to restore the IP device back to original factory settings. White Bala

2 ContentsIntroduction ... 3Operation and settings ...

20 Operation and settings Day/Night > Mode: Select [Mode] option on the [Day/Night] menu, then select the following mode. - Auto: [Day/Night] mode

Operation and settings 21 > Mask Color : You can make any color by adjusting R.G.B LEVEL and adjust the transparency of MASK. > Height: Increase

22 Operation and settings > Sharpness: The degree to which the boundary of the two portions is clearly distinguished. Adjust the value using by j

Operation and settings 23down box, the camera supports five types. (Highest, High, Medium, Low and Lowest) > Alias: Enter the profile name you wan

24 Operation and settings 2. Click the edge or corner of the window box to adjust the window size. 3. Click the [Save] button to save the setting

Operation and settings 25PTZ ConfiguationAllows the user to configure different PTZ controls by using different PTZ protocols.PTZ configuration > E

26 Operation and settings PresetPreviewYou can see the settings screen from the preview window.1. Move the camera to the point you want by using the

Operation and settings 274. Repeat the steps 2 to 3 to add other preset index number. You can set the preset index number up to 8 for the one group.5

28 Operation and settings Auto tracking (LNP2810T, LNP3020T)Auto tracking > Enable - ON: Auto tracking setup menu appears. Then you can set the va

Operation and settings 29• Default: Click this button to restore the IP device back to original factory settings.Network settingsBasic General > M

Introduction 3The LG Network Camera is designed to use on an Ethernet network and must be assigned an IP address to make it accessible. This manual co

30 Operation and settings RTP stream RTP (Real-time Transport Protocol) is an internet protocol that allows programs to manage the real-time transmis

Operation and settings 31TCP/IPIPv4 address status > Automatically set with DHCP: Select this option when a DHCP server is installed on the network

32 Operation and settings DDNSThis free service is very useful when combined with the LG DDNS Server. It allows the user to connect the IP device usi

Operation and settings 33 - Deny all: Deny all the IP address basically, but the IP addresses in the list are allowed. It needs at least one IP addres

34 Operation and settings SNMPThe Simple Network Management Protocol (SNMP) is an application protocol to exchange the management information of netw

Operation and settings 35802.1xSpecifies whether 802.1x network access is enabled.802.1x/EAPOL using EAP-TLS > Enable: Select on to enable the prot

36 Operation and settings Notes:• When you set to [On] on the [Enable] option, [Enable anonymous login] option is enabled automatically.• You shoul

Operation and settings 374. Select the authority from the drop down list to provide the access rights to each user and then click the [Save] to conf

38 Operation and settings Event settingsEvent ServerEvent Servers are used to receive the recorded video clip and/or notification messages.FTP server

Operation and settings 39 - Address: Enter the SMTP server address. - Port: Enter the port number. The default port is 25. - Enable SSL: Check when us

4 Operation and settings Operation and settingsBefore using the system• Before using the LG IP device make sure the connections are correct and veri

40 Operation and settings Motion detect PreviewYou can preview the motion detection window on the preview window. General > Sensitivity: Enter the

Operation and settings 41Triggered Event When an event (VA/ Motion detect/ Sensor Event) occurs, this unit records the live images and routes as confi

42 Operation and settings Scheduled Event Activation Time > Always : You can use always by using the FTP server regardless of activation time. &

Operation and settings 43WHITE BALANCEATW -AUTO -MANUAL COLOR TEMPINDOOR/OUTDOORRED -100 to 100BLUE -100 to 100ONE PUSH -INITIAL SET -DAY/ NIGHT AUTO

44 Operation and settings SPECIAL OSD OFF -ON USER TITLE ON/OFFZOOM MAG ON/OFFFUNCTION ON/OFFLANGUAGE ENG/CHN(SC)/KOR/RUS/JPN/CHN(TC)INITIAL SET -EXI

Operation and settings 45Notes:• button: Used to move upper direction on the menu screen.• button: Used to move lower direction on the menu screen

46 Operation and settings Exposure settings IRISSelect the desired lens iris value for camera exposure.Select [IRIS] option on the [EXPOSURE] menu,

Operation and settings 47SENS-UPIf pictures are not clear due to darkness, this SENS-UP operation would increase the sensitivity of picture. 1. Selec

48 Operation and settings - OUTDOOR: The color temperature range for the proper white balance is approximately 5 100 K. > RED: Set the desired re

Operation and settings 49Note:The parts with the registered mask numbers from AREA1 to AREA4 have the same color. (So do the parts with the numbers fr

Operation and settings 5Accessing the LG IP deviceYou can access the LG IP device by following the below steps.1. Install LG Ipsolute VMS Program2.

50 Operation and settings STABILIZERThe image stabilizer function minimizes the appearance of shaky images caused by low-frequency vibration. This fu

Operation and settings 51Reset setting 1. Select the [RESET] option.2. Click button and the RESET menu appears.3. Use or button to select opt

52 ReferenceReferenceTroubleshootingThis section provides useful information to help you to resolve any difficulty you might have with your LG IP dev

Reference 53Accessing camera external to the local network• Firewall Protection: Check for the internet firewall with the system administrator, eithe

54 Reference• If we obtain lower frame rate than set we need to check from the system administrator for sufficient bandwidth available or reduce the

Reference 55BNC output usageBNC connector is for convenience of camera installation, and it is not suited to surveillance.Power connection • It is re

56 ReferenceSpecicationsItem LW9422 SeriesImage Sensor 6.49 mm (1/2.8 Type) CMOS SensorTotal Pixels 1 920(H) X 1 080(V), 2MLens F1.6(Wide) to F2.1(T

Reference 57Sample Rate 8 KHzAudio Bit Rate G.711: 64 kbps, G.726: 24 kbps, 32 kbpsEthernet 10/100 EthernetProtocol IPv4 and IPv6 TCP/IP, UDP, HTTP, H

58 ReferenceMisc. Mount Accessory Mount AdaptorMaterial Aluminum, Plastic sunshield Rated Power PoE+ / AC 24 V (49 W)Waterproof IP66, IK10Fan Always

Reference 59Item LNP2810 Series LNP2810T SeriesImage Sensor 4.5 mm (1/4 type) CMOSLens x28 Zoom, f = 3.5 mm to 98 mmResolution (Maximum) Up to 1 280 x

6 Operation and settings LG Smart Web Viewer OverviewItem DescriptionSelect the video image size from the drop-down list. Notes:• Select [FULL SCREE

60 ReferenceEthernet 10/100 EthernetProtocol IPv4 and IPv6 TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMPIPv4 FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, D

Reference 61Item LNP3020T SeriesImage Sensor 6.49 mm (1/2.8 type) CMOSLens x30 Zoom, f = 4.3 mm to 129 mmResolution (Maximum) Up to 1 920 x 1 080Day&a

62 ReferenceProtocol IPv4 and IPv6 TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMPIPv4 FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS (LG)Open Protocol ON

Operation and settings 7Click to save the current image in JPEG format on your computer.1. Click the [Snapshot] button and then the Snapshot window i

8 Operation and settings 1. Click this button to open the folder browse window. Click the button again in next time, video is recorded automaticall

Operation and settings 9Conguration menu overviewThe following table shows the list of menu items. The configuration images are different from each m