LG LVC-A910HM Manuale Utente

Operating InstructionsLVC-A910 LVC-A911 LVC-A912 LVC-A913Before installing and using the camera,please read these instructions thoroughlyand retain th

CAMERA ID101. CAMERA IDTo connect a large number of camera , It can beassigned to identification number to each camera forcamera control easily. (OFF,

FOCUS MODE SET112. Focus Set:2-1. Focus Mode Set :This function is for focus mode setting A) Set up "FOCUS SET" in main menu using Menu key.

FOCUS MODE SET122-4. ZOOM END Set :This function is for selection of zoom end position.A) Select the "ZOOM END" in submenu using Tele/wide k

AWB SET133. AWB SET3-1. WB Mode Set :This function is for changing the WB mode.A) Set up "AWB SET" in main menu using Tele/wide key.B) Selec

AWB SET143-3. BLUE ADJUST Set :This function is available for Special, Push Auto,Manual WB mode.This mode is the adjustment of user option for special

AE SET154. AE SET4-1. AE Mode Set :This function is for changing to AE mode. A) Set up "AE SET" in main menu using Tele/wide key.B) Select t

AE SET164-4. BRIGHTNESS ADJUSTMENT Set :A) Select the "BRIGHTNESS" in submenu using Tele/wide key.B) Adjust the level from ##MIN to ##MAX. u

AE SET174-7. SHUTTER SPEED Set :A) Select the "SHUTTER" in submenu using Tele/wide key.B) Set the mode NORMAL, 1/125 - 1/10000 using Focus k

SPECIAL SET185. SPECIAL SET5-1. User Title Set :This function is for custom title on screen display.A) Set "SPECIAL SET" in main menu using

SPECIAL SET195-5. NEGATIVE Set :This mode is to change color and luminance to negative.A) Select the "COLOR" in submenu using Tele/wide key.

2CAUTION:TO REDUCE THE RISK OFELECTRIC SHOCK, DO NOT REMOVECOVER(OR BACK) NO USER SERVICE-ABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SER-VICE PERS

MOTION DET206. MOTION DETECTION SET6-1. DETECTION Mode Set :A) Set "MOTION" in main menu using Tele/wide key.B) Select the "DETECTION&

F. OSD SET217. F. OSD SET7-1. FUNCTION Set :A) Set "F. OSD" in main menu using Tele/wide key.B) Select the mode what you want in submenu usi

E. SENSITIVITY SET228. E. SENSITIVITY SET: (option)8-1. E. SENSITIVITY SET A) Select the "E.SENSITIVITY" in submenu using Tele/wide key.B) S

WDR SET239. WDR SET (option)9-1. WDR SETA) Select the "WDR" in main menu using Tele/wide key.B) Select the "WDR CONTROL" in submen

24On Screen DisplaySome of these functions willbe displayed every time thecamera is operated and thendisappeared after 5 seconds.FUNCTION OSD Format

25On Screen DisplayFUNCTION OSD Format Description6. STAND-BY Indicate the camera stand-by during thecamera’s power turning ON.7. WBC ModeWhite Balanc

26SpecificationsImage device 1/4" interline transfer CCDNTSC, High resolution : 811(H) X 508(V) 410KNTSC, Normal resolution :537(H) X 505(V) 270K

27SpecificationsFocal Length 0.01m (WIDE), 1.0m (TELE)OSD(On Screen Display) ON/ OFFPower requirement DC 12VVideo outputComposite Output 75Ω Terminat

P/NO: 3834RS0072B

Contents3FEATURESThe power zoom color video camera is designed for use in monitoring system.• High resolution and high sensitivity with a 1/4 inch CCD

Cautions for Safe Operation4Power SupplyThis camera must always be operated a 12V DCpower supply.Handling of the unitBe careful not to spill water or

Operating Controls and Their Functions51. Tripod adaptorThis adaptor can also be attached on the bottom of the camera.2. Lens mount cap3. TELE KeyWhen

Power In / Control6You can adjust focus and zoom by a pin terminal on the back sideof the camera.*is the color of the cable.(If it is offered)

Power In / Control7

External Key (A/D IN)8Schematic diagram of wiredremote-control

MENU DESCRIPTIONS9Using TELE, WIDE, FOCUS+, FOCUS- button• TELE and WIDE are used for UP and DOWN.• FOCUS+ and FOCUS- are used for INCREASE and DECREA