LG LVC-A730HM Manuale Utente

Operating InstructionsLVC-A730NP (PAL, Normal)LVC-A730HP (PAL, High)LVC-A730NM (NTSC, Normal)LVC-A730HM (NTSC, High)Before installing and using the ca

10• MANUAL( ): Hue control adjustment is available manually. Adjust MWB CONTROLto a desired value.• PUSH AUTO(PWB): A regular environment or objectwas

11Menu 28. CAMERA IDTo connect a large number of camera, It can be assigned toidentification number to each camera control easily (OFF, 1~255 :total n

AE MODE AGCAGC ADJUST 0AGC ADJUST 10AE MODE AGCAGC ADJUST 10Set the AE mode to AGC usingF(+) or F (-) key code. The AGCADJUST menu is appeared.Adjust

13• MANUAL: Use to set the shutter speed, IRIS and AGC manually.AE MODE MANUALSHUTTER NORMALIRIS ADJUST 0AGC ADJUST 60SHUTTER NORMALAE MODE MANUALSHUT

14On-Screen DisplaySome of these functions willbe displayed every time thecamera is operated and thendisappeared after 5 seconds.FUNCTION OSD Format

15On-Screen DisplayFUNCTION OSD Format Description6 WBC ModeNon display White Balance AUTOSWB Special Auto White Balance; Adjustment Mode according to

16SpecificationsImage device 1/4" interline transfer CCDNTSC, High resolution : 380,000NTSC, Normal resolution : 250,000P

17SpecificationsPower requirement 12V DC UL Listed, Class 2 Power Supply onlyVideo output BNC-type, S-Video-type (1.0Vp-p, 75ohms)Power consumption Ma

P/NO.: 3834RC0018J

2This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. Theselimits are

3ContentsFEATURESFeatures...

4Power SupplyThis camera must always be operated a 12VDC UL Listed, Class 2 Power Supply only.Handling of the unitBe careful not to spill water or oth

5Control names and Functions1. Tripod adaptorThis adaptor can also be attached on the bottom of the camera.2. Lens mount cap3.When push the TELE KEY,

6POWER IN/CONTROLYou can adjust focus and zoom by a pin terminal on the backside of the camera.*is the color of the cable.(If it is offered)PIN NO.Des

7• The On Screen Display menu can be used by MENU,TELE, WIDE, F.NEAR(F(+)), F.FAR(F(-)) Key.Menu 11. INITIAL SETSet the initial mode ON, the changed d

84. NEGATIVEUse for changing NEGATIVE and POSITIVE mode.• ON: NEGATIVE mode, • OFF: POSITIVE mode5. FOCUSAUTO/MAN: Set the focus mode to Auto or Ma

97. WBC MODE• AUTO: WB Range 2800°K ~ 8000°K• SPECIAL(SWB): Under the special WB condition (Differ from curve of the control colortemperature), Adjust